If you are painting inside, you should also want to open a window to help with ventilation. 2. Tape off any areas that you do not want to spray paint: Rustoleum tub and tile spray paint comes in a 12-ounce can and is available in coastal fog and white colors. The paint dries up in around 20 mins and leaves your tub with a porcelain-like and smooth, glossy finish that is waterproof. As seen in this TikTok video, covering the areas that you don’t want to get paint on, so porcelain and sinks specifically, is key and you can do this by using some plastic bags and tape. Rinse away any excess dirt from the sanding step with warm water and (if you have it) sugar soap. Leave to dry, ensuring no residue from sanding or washing remains. I recently did the same project with the Homax spray and had similar results after the first kit didn't achieve the expected coverage, and the overspray and fumes were unbearable; so I went out and bought the Homax brush-on kit to "finish" the job.

It has taken years of fine-tuning but we think we have got this enamel just right for your bath. It has got to look really good but also be highly durable and easy to clean. While it is possible to spray a bathtub with specialized coatings, it is not recommended to do it yourself unless you have experience and expertise in refinishing bathtubs. Yes, it is possible to paint your bathtub yourself, but it can be a challenging and time-consuming project. To properly paint a bathtub, you will need to thoroughly clean and prepare the surface, apply a special tub. The reason for identifying the material is to know what kind of paint to get. There is spray paint formulated specifically for metal and paint for plastic. If your fixtures are a combination of both, your best bet is to use metal spray paint. Tools and SuppliesWe repair any damage such as chips in the bath, scratches , limescale, worn away enamel from hard water, if there are holes or damage at the bottom of the bath, we repair that also. Dispose of Materials Properly: Dispose of any leftover paint, empty spray cans, and other materials in accordance with local regulations. Do not pour paint down the drain or throw away spray cans in the regular trash. We thoroughly clean the bath with specific cleaners and remove any rotten silicone around the bath.

Brushes and rollers, on the other hand, are far cheaper and less messy to use. They also make for slower work and don’t provide quite the same level of factory-standard finish, but you can get very close if you take your time and paint carefully. If choosing this route, then it is recommended that a roller or a smaller paintbrush is used, as these will allow you to apply your paint without leaving any lines. SandpaperWhen choosing spray paint, make sure it is the right one for the job. Here are the best options for bathtub spray paint. Epoxy Paints Wear protective gear: Wear a respirator mask and gloves to protect yourself from the fumes and chemicals in the paint. The larger the damage, the more noticeable the repair will be when using a DIY repair kit, which do have limitations,’ says James Winston, research & development manager at Plastic Surgeon. ‘Calling a professional will avoid a failed repair and potential water leaks.’ Epoxy paint is more durable and resistant to water and chemicals, but it can be more difficult to apply and may have a strong smell. If you do choose to attempt this easy DIY project yourself this weekend, there are some steps that you’ll want to take to ensure the best finish possible.

Choose the right spray paint type and equipment to paint the bathtub. Not all spray paints are created equal. You need to use professional-grade spray paint designed for bathtubs and tiles. The bathtub is an area where spray painting needs specific conditions. You need to look for waterproof paint for a durable finish. Also, you need to prepare that bathtub surface for a durable and smooth spray paint finish. What Kind Of Spray Paint You Should Use For A Bathtub?Before starting any work on a bathtub you must ensure that it is clean and dry from top to bottom. This means that less sanding will be needed.