It is also possible to attach two drawer slides to one bracket with which you can realize two connecting heavy duty drawers. This set of 80kg drawer slides can be mounted at a 90° angle to the floor or ceiling using our mounting brackets. Now you can easily fix the inner part of the drawer guide against the side of the drawer and the other part against the inner wall of the casing.

It's essential to ensure that the space between the drawer and the cabinet's side walls is exactly the same as the thickness (19mm) of these slides. The 200 kg evenly distributed load applies if the drawer slides are used standing, or mounted against a side. With years of experience in the kitchen and office furniture industry, there isn’t much our technical boffins don't know about our products - so if you have a problem identifying a product, get in touch on 01482 714488.

Locking Heavy Duty Drawer Slides 】：Swing the blue handles to lock and unlock,They can be locked both when they are closed and fully opened, Prevent from sliding. They are mounted on the sides of the drawer and cabinet and provide full extension and easy removal of the drawer. If the drawer needs packers the drawer will be cut either 25mm shorter in width or 50mm shorter in width according to if you need a packer one side of the drawer or both sides. Furthermore, when the drawer is closed, it is important that both slides enter the soft-close system at the same time. Side-mount runners: These are commonly used and feature two parts—one side is attached to the drawer's side, while the other side is mounted on the cabinet.

They are designed for high loads, and the option to divide them is not robust enough and not idiot-proof. When fully extended, the drawer runners bend much more in a horizontal position than if you mounted them upright. If not parrallel, the inner rail is forced to get seperated from the outer rail, causing permanent damage. Drawers are a great place to organize your home accessories, but also an ideal hideout for our treasures.Drawers with 2-part drawer guides can be partially pulled out, while drawers with 3-part drawer guides can be slid completely outside the casing. Drawer Runners, also known as drawer slides, are hardware components used to facilitate the smooth and controlled movement of drawers in furniture, cabinets, and other storage units. When specifying your bedroom drawer box it is important to be aware that the width quoted refers to the width of the unit and not the width of the drawer box. This will damage the ball cage and may cause balls to come loose (a few missing balls is not a big problem, by the way). Also check the mounting method (screw bottom, top), maximum drawer load (even up to 140 kg), additional mechanisms (soft-close, full extension, push-to-open), guide height (for 900mm length the most common guides are 53mm high) ) and many other technical parameters!

With the help of our corner mounting brackets, these drawer runners can be mounted at an angle of 90° to the floor or ceiling. The brackets are designed in such a way that you have the choice of having the lip protrude under the drawer, or to the side of the drawer. Integrated in a soft-close drawer guide is a system that makes the last 60 mm of the push-in cushioned and automatic.You can also choose not to have the drawer guides extend to the maximum, but to have the movement stop sooner. When I raised a query about whether it would arrive before Christmas, the seller came straight back with updates and addressed my query. Undermount runners: These runners are installed underneath the drawer, providing a clean and hidden appearance. If you choose the latter option, use a thread diameter of up to 4 mm so that the countersunk head partially disappears into the hole.

Solid Steel Balls：Φ6mm high density solid carbon steel balls，Loaded and pulled more than 100,000 times, quiet and smooth, long-lasting use. There are no sharp wire ends protruding anywhere, so that the brackets can be placed close to a wall. Because you have not tightened most of the fasteners hard, you can still position the guides in relation to each other.

For lockable version, if the inner rail is pulled out all the way, they cannot be swapped to mate with the opposite side of outer rail, or the slides get permanent damage. You thus limit the arm of the protruding weight, so that the guides can handle a greater load compared to a maximum extension.