The motor and tanks are situated low down on the floorhead, rather than attached to the body of the cleaner. It’s a faff to put together and the unusual tank-in-tank design makes filling, emptying and estimating clean fluid levels tricky. By the time you are done, your carpets will look happy and refreshed; a nice change from their usual tired look. Occasionally, the Bissell Carpet Cleaner may fail to dispense the cleaning solution to the flow being cleaned. This means it’s not quite as well suited to smaller spaces and you’ll likely need a larger cupboard for it to sit inside comfortably.

With the addition of the edge cleaning brushes, it really comes together to create a thorough cleaning solution. The separate mess tank on the tool keeps all the fur and debris out of the main tank, making cleaning up easy. The components work in unison to loosen dirt, making it easier to remove from rug and carpet fibres. With the BISSELL StainPro 6 Carpet Cleaning System you can easily get out the embedded dirt, stains, allergens*, and odours that vacuums can't reach. The following are the most common steps in the troubleshooting procedure for a Bissell Carpet Cleaner with a faulty suction system.

When clean water starts coming out, it is an indication that the problem has been fixed, and the machine can be used without leaving behind dirty water or stains on the carpet. It delivers on its deep-clean promise with outstanding cleaning results and solid vacuuming to leave carpets relatively dry. However, you should stick to the instructions in the user guide when attempting to disassemble your Bissell Carpet Cleaner for any reason.

The spray delivered plenty of fluid and the brush is just the right size and stiffness for you to agitate the carpet pile. Do you agree with our thoughts on the carpet cleaner, or are there others that you think are better suited to the task? It’s certainly proved itself to us in a number of ways, and if you have pets or kids it’s a great way to get the dirt and grime out of the carpet before it turns into an old stain. Only the tank-within-a-tank design raised any issues, being difficult to judge remaining clean fluid when the dirty water level rises.

The tank itself isn’t the most obvious to fill – none of its ports are labelled – so you’ll need to resort to the manual. The next step involves repeating the cleaning procedure over all the previously cleaned sections with finer brushing. The machine trigger is held onto the attachment to spray the cleaning detergent and released to suck the dirty solution off the furniture and into the tank bladder. You can even use it as part of your regular carpet cleaning session to try and scrub out irritating stains that just don’t want to go away.

The StainPro 10 heats and then puts down a good – but not excessive – amount of fluid across its cleaning width. Within a couple of passes the stain was significantly reduced, thanks in no small part to Bissell’s excellent cleaning solution.It has a large water tank capacity of up to six liters and a continuous cleaning mode for large cleaning tasks. Editorial independence means being able to give an unbiased verdict about a product or company, with the avoidance of conflicts of interest. The technology employed in this machine enables it to integrate sophisticated formula, water, and brush coils in the cleaning process. With 12 rows of DirtLifter PowerBrushes, the ProHeat 2X Revolution Pro cleans deep down into the carpet fibres, leaving you carpets looking and smelling like new. Clearly, the Bissell doesn’t set out to be a svelte shampooer that you’d whip out for emergency spills.