The Molise Firmware is supplied with a second firmware, this is the firmware of the TFT screen. This TFT Firmware is based on the Official Firmware of Bigtreetech with the support among others of the following touch functions:

For V2.1 and V2.0 boards, all UART wiring is internal to the board and no additional wiring is necessary. To enable UART, jumpers need to be inserted. Serial.print("New Calibrated Values: "); Serial.print(accX); Serial.print(" "); Serial.print(accY); Serial.print(" "); Serial.print(accZ); If you want to customize your own UI on MKS H43, or modify some functions, you can using the "DGUS Tool" to make it, only support Windows OS so far:

Why instruct a property agent at all?

I keep receiving the error "Printer is not ready The klippy host software is attempting to connect. Please retry in a few moments." adxl.setImportantInterruptMapping(1, 1, 1, 1, 1); // Sets "adxl.setEveryInterruptMapping(single tap, double tap, free fall, activity, inactivity);"

The MKS Gen L V2.1 or V2.0 is the recommended main board for the OAT. Make sure that at the V2.1 board a jumper is set at "Drive IC Power 5V". HitmanPro is a second-opinion scanner that takes a unique cloud-based approach to malware scanning. HitmanPro scans the behavior of active files and also files in locations where malware normally resides for suspicious activity. If it finds a suspicious file that’s not already known, HitmanPro sends it to its clouds to be scanned by two of the best antivirus engines today, which are Bitdefender and Kaspersky. Molise is modified firmware for brand printers Artillery. The firmware also supports Sidewinder X1 and X2, Genius and Genius Pro and la Hornet. Open the "Configuration_adv.h" file, find "LCD_SERIAL_PORT", and configure the serial port number used to connect to H43. Please make sure that "LCD_SERIAL_PORT" should be different with the "SERIAL_PORT" in "Configuration.h", as "SERIAL_PORT" is used to communicate with the PC. And the baudrate should be set to 115200 by default. Accepts only 1 or 2 values for pins INT1 and INT2. This chooses the pin on the ADXL345 to use for Interrupts.

The pinout for the MKS Sbase v1.3 can be found here and the schematic for the Duet 2 WiFi for reference can be found here. Return to 250.000 connection speed (old bug fixed - don't forget to change the connection speed on the TFT screen)