If you opt not to bury the cable, you need to choose a waterproof Cat 6 cable with a UV protective jacket to safeguard it from potential damage caused by sunlight exposure, especially when running the cable along the side of a house or across a roof. When power is applied, the cable will rapidly overheat, with the initial temperature increase being twice that seen from a pure copper cable.

The IT service from this company was exemplary and resulted in a very good WiFi signal throughout the house. The Petroleum gel/jelly inside the cable prevents ingress of moisture and water inside the core in the event of any damages to the cable. Get this premium-grade network cable to keep your local network running smoothly or your devices hard-connected to your network and choose reliable, high-speed access all day, night, and year-round. On a more serious note, some regions are significantly more affected by frequent lightning strikes than others. It is extremely labour-intensive and can lead to greater issues if the work is not completed to a professional standard.It’s important that you invest in high-quality cables that will last; you don’t want to dig up the cables you worked so hard to bury in the first place.

If your installation involves wiring up outdoor WiFi access points or IP surveillance cameras the water resistant housings of these devices may be too small/tight for the thicker varieties of cable. If you require a custom pin out for the wiring please contact us, we can make pretty much ANY cable!If you’re choosing to run your outside Internet cable above ground, the cable should never be on the ground and exposed unless you’re using an outdoor-rated cable. Check out our in-depth blogs and educational videos for a comprehensive understanding of Keystone Jacks and other industry related information. If you are certain of your environment, you may also use unshielded direct burial cable if it is attached to a single structure only (like along the siding or under the soffit of a house). Four individually bonded twisted pairs of solid 24 AWG copper conductors • Polyethylene insulated jacket, flame retardant to IEC/332-1 flame test 1 • To EIA/TIA 568 and ISO/IEC 11801 requirements EC verified • Supplied in 100m reels • Jacket sequentiall.