We will issue a refund for any amount above 2 damaged slabs per pack upon provision of photos showing the damaged slabs, received within 7 days of receipt of goods.

Infinitepaving Ltd will be in no way liable to you for any loss, damage or expenses, either indirect or consequential, resulting out of the above situations or from the use of products purchased by you on Infinitepaving Ltd. When using Joint-It Simple with either granite or slate, pause briefly after soaking your paving, before opening the bucket of Joint-It Simple, to allow time for the stone to absorb the water. Please let us know if you’ve got any more questions about Joint-It, or any of our other products and services.We recommend using Joint-It Premium Seal prior to laying paving if you are using Slate, Black or Blue Limestone or Honed Black Granite. Whilst Joint-It Simple is low maintenance, all patios do require an element of maintenance annually, particularly in areas that are shaded from the sunshine or after the colder, damp winter months. We have samples available across all of our ranges and easy to use laying guides to help you install our products. Maintenance information for Joint-It Simple All outdoor paved surfaces and patios require a little maintenance when exposed to the ever changing British weather conditions and foot and vehicle traffic. Joint-It Simple – can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles.

Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7. Pointing with traditional sand and cement is extremely time consuming, laborious and doesn’t always last. Joint it does not leach and is non-staining, so it is safe for natural stone, but limestone and honed black granite should be pre-sealed before pointing with Joint it simple.To get the best results from Joint-It Simple, joints must be a minimum width of 3mm and a depth of 25mm for the joint to have stability when it is set. Aquacut Aquacut Limited has a dedicated team of craftsmen with decades of experience processing a wide range of building materials such as porcelain, stone, metals, glass, and composites to create functional and beautiful building finishes. The paving should not be walked on for approximately 24 hours after application in temperatures of around 20° Celsius. This easy jointing compound provides the ideal solution for professional contractors and homeowners.

If the temperature is above 30°, we recommend that you wait until it is cooler in the evening or early morning before applying Joint-It Simple because water will evaporate too quickly to allow you to brush the product into the joints. Very helpful staff, sent me photos of 3 different tiles together and measured the exact tile size so that I could make my decision and advised me on the best colour grouting. Joint-It Simple is tightly vacuum packed inside a tough plastic bag to prevent any air from reaching the product before it is ready to be used. If you are working by yourself, work on small areas and keep wetting the paving as you joint your paved area.Space must be left to allow for 50mm of sand and cement, plus the depth of your paving slab to sit on top of the paving bed. All outdoor surfaces require some maintenance when exposed to the changing weather conditions and foot/vehicle traffic.

However Joint-It will set rock hard and the specialist mix will ensure that it stays in your joints for years to come.

If you decide to power-wash your patio, the water won’t lift Joint-It Simple out of the joints once the manufacturers’ guidelines have been met – it will drain down through the joints, which is why we say that Joint-It Simple is power-washer resistant. Depending on the size of your patio and the weather, Joint-It Simple should take approximately 30-40 minutes to apply to a 30m²/323 sq ft paved area.