With no load, the blade is capable of 5500 RPM with a diameter of 216mm and a 45° mitre cutting capacity.

Firm Fixing: Adopting a rubber wheel and wide design to prevent slipping, ensuring that the guide wheel can independently apply uniform compression force to the wood during the dynamic sawing process.These stationary saws use a single rotating blade that lowers onto the material to make a sharp and precise cut. plastic legs: The first step is to push the two plastic legs into the corner of the wall and align them along. This brand is made for BnQ and I think they have a 3 year warranty so if you have a receipt it is worth checking that. iii) Expenses shall be deemed to include the usual Auctioneers’ commission on the re-sale and all expenses for porters, advertising, market tolls, carriage, care, storage, keep and otherwise. vi) The Auctioneers shall have the right at their discretion to refuse admission to their premises or those of their clients by any person.

i) The Purchaser of any Lot is responsible for complying with all legal requirements as to the safe use of Lots purchased at the Sale and shall ensure compliance with all relevant legislation relating to the safe use of such Lots. If those last two were broken then the saw would possibly not turn or if they did it would be realy noisey. i) All Purchasers must register their names and addresses before they are permitted to bid in an online sale. I guess this is a warning about these chinese machines that although they may be ok and last some people a long time, when they do break then its just another chuck away item as you cant get parts for them(except brushes). Always wear goggles when operating the saw to avoid contaminants – including the bigger pieces - from harming your eyes.When cutting through material, always keep your fingers at least 10 cm away from the path of the blade and never lift the blade or the material until the blade has completely stopped spinning.