J Roller - for laminates and Edging - Solid & Strong for pro use - 12 inch

Product Information

The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue. Veneer allows us the luxury and appearance of real wood with infinite design options not available using solid woods. When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. Once it's rolled, trimmed, and the sharp edge taken off I smack away with a mallet a little bit and it really works well.

After the contact cement is dry - DON'T try to just put in on by hand - use a bunch of "stickers" in between the two surfaces - place the laminate on top - center it - then pull out the middle sticker. This J-Roller was specially designed for use with self adhered flashing materials on construction projects. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface.As a roller ‘rolls’ over the surface compared to the rubbing action of a felt block, the chance of scratching the surface is significantly reduced. Using the Fulton J-Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion. I don't use the safety knobs as they're a pain to add and remove and to be fair they don't sway that much if at all without them. In my experience, if the contact cement is dry to the the touch on BOTH surfaces it will stick and NOT let go. The 1-1/2″ diameter x 3″ wide rubber roller has no axle projection on one end, for scratchless flush work.

The Rubber sleeve is not glued on the bearing roller so you can slide it over 'off centre ' to recess the metal shaft. The J-roller measures approximately 12” in length with soft rubber material for comfortable non-slip grip and optimal leverage. Adding pressure by rolling this tool over your planks ensures that our Vacuubond technology seals the planks tightly onto the wall. The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface.The 3 inch semi hard rubber roller has just enough softness that you can apply even pressure across the roller width. The forward facing bolt makes it easy to adjust to the desired height, and the UHWM plates protect the surface of the racks and rigs. I will keep this around if I ever need to install or replace more wallboard or for any other adhesive pressure tasks! There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.