G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

Product Information

The problem is the length of the process connection is 23mm as per PT drawing and the female fittings have maximum depth of approx. Other options = Units with special voltages and/or 60 Hz possible, Higher operating pressures and greater volume flows on request, Water cooled condensers available (larger models only). Not knowing the exact application and set-up it is almost impossible for us to diagnose the issue from a distance. SKF Connection Nipple: SKF provides a wide range of connection nipples covering many different thread combinations and sizes. Just to confuse things further, often the T in BSPT refers to Thread and doesn't indicate either Taper or Parallel.

As sealing of the connection takes place on the washer and not on the thread itself, no sealing compound or PTFE tape is required. It is useful to know their differences – and also how to recognize which type is in use – without having to remove the entire assembly. BSP sizes don't match up with what you measure on the scale of a ruler, which can obviously cause some confusion. Universal fitting with internal thread CELLFAST IDEAL G1 / 2 "- G3 / 4", for water intake with external thread.The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.

These are sometimes denoted by the letter G, for example G 1/2" means a parallel 1/2 inch BSP thread.

The official standard changed to the EN 837 when the European Union was formed and they decided to use the same standards in every country. The FL2S-MC series are straight fittings with NPT, G, R, metric or metric canonical male threads to a either a compression ring or cutting ring connection point. There might be a little color difference due to the monitor, camera or other factors, please refer to the physical item. For a taper thread, it is the diameter at the "gauge length" (plus/minus one thread pitch) from the small end of the thread. In 1991 I transferred to Lawrenceville (USA) and since 2006 I have been product manager for mechanical pressure and temperature instrumentation and accessories.

As for the “A” or “B” in some name, such as the common G ¼ B connection type, the letter denote lets users know 1) it’s a male thread, as female BSP threads don’t have a final letter, and 2) its tolerance class. Even though BSP is now based on metric measurements, this system’s names still reflect their imperial origins. Both the A and the B forms connect to the same female thread and seal without a problem in combination with a sealing gasket. The push-in fitting comes with a sealing ring on one side and threads on the other side, so it's quick and easy to connect and doesn't require any special tools.

The inner diameter of connector: 25mm(/G3/4inch), outer diameter: 20mm(G1/2inch), overall length: 34mm/1. Have you ever looked at a pressure gauge in a pipe assembly and wondered which connection type it has? The WIKA news subscription informs you, free of charge, by e-mail whenever there is a new blog article. Tightening, though, has to be done with care: Too much compression can lead to galling, and over-tightening can damage the threads. S. and Canada also use parallel threads like the NPSM (National Pipe Straight Mechanical) connector.