AquaHouse DI Car Wash water filter, Pure water for Spot Free Rinse Car Valeting & Window Cleaning

Product Information

Or do you only have access to hard water, and you’re afraid that it will leave stains and cause limescale formations on your car as it does on appliances? These can be equipped with Pentair's digital NXT2 controllers which are networkable with CAT5e cable. The filter can be easily refilled once the Polyphosphate is spent, thanks to a refillable housing with a threaded screw top. Hard water will dry more quickly since it can’t be absorbed by the car paint due to its mineral richness.

How hard is your water: Before picking your equipment, test your water to figure out exactly how hard it is. What kind of salt you plan to use: The better quality salt, the longer your water softener will use. Washing both a big car and a black car in a hard water area has never been straight forward: Water-marks would appear on one side of the car by the time I’d finished rinsing the other side!The backwashing process (where the inlet and outlet connections are swapped over and water passed upwards through the filter) moves the resin bed around and re-classifies some of the un-used resin back to the centre of the filter. Although the spots that form on cars because of high TDS levels are easier to remove than the limescale formation caused by hard water minerals, you might still want to eliminate them for that extra clean look. This is a breakthrough in filtered water product for car washing that is proving to be very popular.

With soft water you can achieve better results with less chemical, and that means lower chemical cost per car.Come join the discussion about methods, materials, equipment, restoration, classifieds, troubleshooting, and more! As we discussed earlier, waxes do perform better with hard water, but a little extra elbow grease will go a long way to fixing this problem. No need to dry: with the application of purified water, no need to clean the remaining drops regarding stains!

However, within a year I added an RO unit for drinking/cooking water and the spigot tap was replaced with one from the RO unit. I've found using the soft water still leaves spots if I don't dry fast enough, they're just slightly easier to get off.When we installed a softener in the old house, we installed a new hose bib from just after the softener as part of the install. If you decide to go with this method, once the water is boiled, you can transfer it to another container, cool it down, and use it to wash your car. Soft water is water free from minerals, while TDS, which cause stains, also include sugars, amino acids, carbon dioxide, and other organic and inorganic matter. Softening is an advantage to the car washer since the minerals in the softened water are easier to get rid of and don't form the scaling associated with hardness, but high TDS water, softened or not, will produce spots.