The On/Off Switch is a two (2) button latching type. The buttons are located on the Front Left Hand side of the Cutting Handle. Always ensure that you have selected the correct saw blade for the material being cut. Do Not use this mitre saw to cut materials other than those specified in this Instruction Manual. Evolution Power Tools reserves the right to optionally repair or replace it with the same or equivalent item. There is no warranty – written or verbal – for consumable accessories such as (following list not exhaustive) blades, cutters, drills, chisels or paddles etc. In no event shall Evolution Power Tools be liable for loss or damage resulting directly or indirectly from the use of our merchandise or from any other cause. Evolution Power Tools is not liable for any costs incurred on such goods or consequential damages. No officer, employee workmanship. This guarantee is void if the tool being returned has been used beyond the recommendations in the Instruction Manual or if the machine has been damaged by accident, neglect, or improper service.

A Dust Bag (not supplied) can be fitted to the extraction port at the rear of the machine. (Fig. 3a & 3b)c) Keep children and bystanders away while operating power tool. Distractions can cause you to lose control. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Note: It is recommended that the operator considers wearing protective gloves when handling the blade during installation or when changing the machines blade.

Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hat or hearing protection usedSafe & User-Friendly: The FURY6 emphasizes safety, with dedicated on/off switches for both its modes. Its simple design ensures switching between functions is a breeze, reducing downtime. Advanced performance; out performs normal saws. When cutting Steel (only in Mitre mode), it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks. of exposure. As some materials can produce dust that may be hazardous to your health, we recommend the use of an approved face mask with replaceable filters when using this machine. Overall the Evolution FURY 6 has a workbench that’s mountable with rubber suction feet to ensure you’re safe by keeping the tool firmly in place while you work. The other reason why customers like this saw are there’s no heat and no sparks. The way this saw performs is far more advanced compared to others on the market. When you are cutting steel using the only in mitre mode, you will see that you will have an instantly workable finish that doesn’t produce any heat, there’s no burr, and most importantly, no sparks. Safety Notice: Remember not to cut metal when the machine is set up as a Table Saw, ensuring safety and preserving the machine’s integrity.