JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A The Aruba 2530 Switch Series is easy to use and deploy, and delivers consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management. dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports

RJ-45 10/100/1000ポート(IEEE 802.3 Type 10Base-T、IEEE 802.3u Type 100Base-Tx、IEEE 802.3ab1000Base-T Gigabit Ethernet)またはSFPスロット(SFPトランシーバーに使用)ポートとして使用可能 insert the SKU and select what the lookup will provide you, in your case "Aruba 2530 48G Switch (J9775A)". For J9537A, J9549A, J9535A, and J9637A modules: K.15.02.0004 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 It allows real-time traffic classification with support for eight priority levels mapped to either the queues, it uses weighted deficit round robin (WDRR) or strict priority (SP). Gig LH (J4860C/J4860D) is not supported on the 1850 series. Other 1850 models not listed do not have SFP ports.ArubaOS-Switch Software Feature Support Matrix for XX.YY (where XX.YY is the software branch you're interested in) document would shed some light about which features are implemented on which XX.YY Software Branch. The YA.16.08 (generically the 16.08) is the cutting edge and it includes all the new features, the most conservative is now the the 16.02...personally I use the 16.05 and the 16.08...but it boils down to what feature you need (16.08 has more feature than 16.07, 16.07 has more than 16.06 and so on...).

For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP⁠+ ports that do not support these 100Mbps transceiver modules.) J8177C/J8177D are not supported for use in the Dual-Personality ports of the 2930M Series Switches.Table 57: Compatibility for SFP copper transceiver modules. The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. The 2930F Switch Series models with 1G/10G SFP⁠+ ports added support for this J9054C/J9054D 100FX transceiver. The J9054C/J9054D are supported in models with 1G SFP ports. For use in the SFP ports on the models listed, and in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Model speed is NOT supported for the J8177D when used in any port (SFP+, SFP28, or SFP56) on teh 6400 series.

JL687A 32p 25G module requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the RJ-45 自动感应 10/100/1000 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T）；介质类型：Auto-MDIX；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工 Right size deployment with choice of 8-, 24-, and 48-port models available with Gigabit or Fast Ethernet ports, optional PoE+, and optional 10GbE uplinks. RJ-45 自动感应 10/100/1000 PoE+ 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T，IEEE 802.3at PoE+）；介质类型：Auto-MDIX；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工

For use in the SFP⁠+ ports of the JL075A 3810M switch. Also used in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed. dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) It prioritises traffic by specifying a port and priority level. VLAN-based prioritises traffic by specifying a VLAN and priority level.