In addition, you’re not making a huge mess. You retain the integrity of the wall by not drilling, and the results are still great in the end. This is the best of both worlds, and the outcome is very exciting because of that. You just need to measure and then use the hanging method that suits your needs. The glue will bond to the wall during this time. If you hang the curtain rod before the hour is up out of impatience, the hooks will come out. 6: Hook up the curtain rod to the supports

These instructions will help you how to hang curtains with Command Hooks securely, evenly, and without causing any wall damage. 4: If the hooks’ tops are excessively lengthy, cut them down.

The hooks are prepared for usage once the paint has dried and sealed. Since they are not frequently used, there is no need to seal them. Sealing the hooks could actually damage any metallic surfaces. Primer comes in brush-on and spray-on varieties. Make careful to operate in a well-ventilated location and cover your work surface with a layer of newspaper if you’re using the spray-on variety. Before usage, shake the can and hold it a few centimeters or inches away from the surface. Before continuing, allow the paint to dry. This is How to Hang Curtains with Command Hooks.

How to Hang Curtains with Command Hooks Depending on the kind of paint you’re using, the paint may or may not need to cure. After they have finished drying, which should only take 15 to 20 minutes, the majority of spray paints are prepared for use. But in addition to a drying period, many interior wall paints also include a curing time. Examine the paint can’s label. Adhesive hooks are excellent if you have heavy curtains. Ideally, these hooks can hold up to 16 pounds each, so even the heavier curtains will work just fine. Normally you need 2 adhesive hooks for every pair of curtains that you want to hang up. The way you add them is via cutting a right angle from cardboard, and then you align it with the window corner.Where you placed the pencil marks on the wall, place your Command hook there. Use a saw, dremel, or bolt cutters to trim the top of the hook if it is in the way and rubbing against the ceiling, crown, or molding.

Don’t remove the hook itself. Only the rectangle or oval to which the hook is fastened should be clipped. This might seem an impossible job at first. But the more you look into it, the simpler it gets. Aside from using tension rods and adhesive hooks, there are some other great options to focus on as well such as using adhesive products such as adhesive hooks, Gorilla glue or liquid nails. Magnetic Curtain Rods When using command hooks to hang curtains, you’ll want to choose a curtain rod that matches the width of your window or the space you want to cover. Measure the width of your window or the area where you want the curtains to hang and select a curtain rod that extends to that width. Make sure the rod is compatible with the command hooks you plan to use and fits securely within the hook’s dimensions. Q: How do you hang curtains without a curtain rod? Make sure the hook is positioned properly. The tip of the hooked portion should curve upward while pointing downward. Add the curtain rod on the adhesive hooks and see if it all holds well. A bit of trial and error might be needed here. However, if you made the right measurements, you should be just fine. Still, it’s important to test out everything before you install the curtains. Hanging Heavy Curtains without NailsPlus, you get to opt for curtains that might not originally be on your mind. The alternative hanging methods open up some clever ideas and you will appreciate the way everything comes together. It’s a creative option and one that you will like quite a bit, since it’s different and still very rewarding. Hanging Net Curtains on UPVC Windows without a Drill Ideally, you want to go with an adjustable tension rod, as it needs to be slightly longer than the window width to add a little bit of pressure. You want to insert the tension rod and see if it all works, then take it down and hang the curtains. It’s actually one of the best ways to hang curtains. Adhesive Hooks Is it possible to hang net curtains on the UPVC windows without drilling? Absolutely, in fact you will find a variety of different options according to your needs. It’s important to study every option as you try to figure out which is the right approach. With that in mind, here you have some of the best approaches to focus on. Tension Rods

Place the Command hook against the wall where you want it to go, then use a pencil to precisely define the top, bottom, and side edges. Why should you hang curtains without drilling holes? There are many reasons why you may want to go down that route. First, it’s a very simple way to hang curtains and you can do it yourself without calling a professional. You can use tension rods, command hooks, Velcro strips, curtain clips, or ropes/twine to hang curtains without a curtain rod. Consider the weight of the curtains and the materials used for a secure attachment. Q: What is the heaviest thing command strips can hold?Follow these instructions on how to hang curtains with command hooks. Get all the supplies together first. Then, clean a rectangular area that now extends 3 to 6 inches (7.6 to 15.2 cm) on either side of the frame and 4 to 6 inches (10 to 15 cm) above it. To do this, dab a soft cloth or paper towel with rubbing alcohol. Next, use the command hooks with sufficient force to ensure proper adhesion to the cleaned area. Attach the curtain rod to the Command Hooks to complete this. After that, simply hang your curtains from the rod. This technique offers a simple and damage-free way to hang curtains in your living area. The curtain can now be hung from the rod. The kind of curtain you’re using will determine how you do this. For instance, while some curtains simply glide onto the rod, others require the use of curtain rings or tabs to keep them in place. This is How to Hang Curtains with Command Hooks. How to Hang Curtains with Command Hooks: Painting Command Hooks 1: Wipe the hook down with rubbing alcohol. Make sure to pull the tape away from the hook in a straight upward motion. You run the danger of chipping the paint if you drag it across the painted portion of the hook. If there are any paint chips, fill them in with little extra paint and a small, pointed brush. This is How to Hang Curtains with Command Hooks. 6: Give the paint time to dry if necessary.