Drayton Wiser Smart Heating Room Thermostat

Product Information

The Heat Hub is a rectangular box with two buttons. One button activates the set-up process, while the other starts the whole system heating. LEDs above the buttons glow green when these options are active. The Heat Hub should be screwed to the wall next to your boiler. The square smart thermostat has a two-inch screen that shows the current temperature of the room it’s in, as well as the desired temperature. It also displays the relative humidity and battery level, and features a flame icon to indicate if the heating is switched on. The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units. These smart radiator thermostats replace the TRVs (thermostatic radiator valves) on your radiator, the type that let you adjust the temperature of the radiator manually. If you don’t have TRVs then you’ll need to bear the cost of changing your current valves to TRVs on top of the cost of the smart heating system. There’s no denying the radiator thermostats are bulkier than TRVs, but we found we didn’t notice them as much as we expected to. The unit is simple to mount on the wall or there’s a stand, the batteries are easy to fit and it’s easy to add to the system like the other devices. We did notice a slight delay of around 10 seconds to one minute between boosting the heating from both the radiator thermostat or the app and the boiler springing into action. The further away from the Heat Hub the thermostat is, the longer the delay. Initially, we also struggled to get the radiator thermostat in the room furthest from the Heat Hub to remain connected to the system at all times. It would often drop the signal, meaning we were unable to control it via the app. However, after installing an optional Wiser Smart Plug – which also doubles as a range extender for the system – in a room between the Heat Hub and the troublesome radiator thermostat, connection issues were no longer a problem.

day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. I have a Digistat+RF room unit with my combi boiler. Is it possible that interference from other wireless appliances can occur, ie computer systems, walkie talkies, radio controlled toys? Essential for every room for accurate running. Simple aesthetic/controls. Competitive price. Easily configured. trusted company. Tamper proof! The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body.

Insights tab provides stats about the number of hours the heating has been switched on and energy saving made through Eco mode I’m not sure about rating this as “amazing” (5 stars) but “better than expected” (4) didn’t seem a fit either..it’s a central heating thermostat..can’t we just give a star rating without these associated comments?? The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality:

However, it does have an Away Mode. Rather than switching the heating off completely while you’re out, this feature allows you to set a minimum temperature at which you want your home to remain at while away. If the temperature plunges below this threshold, the heating will spring to life – handy, if you're concerned about frozen pipes when you’re not at home. These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVs day programming: The most flexible option allowing you to schedule every day of the week independently.

2. Scheduling is quicker and simpler

The information provided in this document contains general descriptions, technical characteristics and/or recommendations related to products/solutions. No, The Digistat+2 has superior programming functions, which allow for greater temperature control. Typically 30M, however building construction and materials may effect this. Signal strength test should be carried out.