BeMatik - 4x1.5mm NL4 Speakon Speaker Cable 13GA 5m

Product Information

Many speaker cabinets contain multiple loudspeaker drivers. In some cases, you might use a separate amplifier channel for each driver within the cabinet. NL2, NL4, and NL8 (or SpeakON) connectors are the industry standard in pro audio for connecting amplifiers to speakers. SpeakON connectors will have either a solder cup or a small captive screw type connection, which makes it easy to build your own speaker cables and repair them over time. When building them, you just need to make sure that you connect the positive and negative terminals of each pinset to the appropriate terminal on each side of the cable.

Reddit Pin swap / pin flip cables : r/livesound - Reddit

Hi everyone! I've just been told I need to work with NL4 pin swap / pin flip cables at an upcoming gig, but I have never heard of them before. I tried asking the manger, but he just said they're short cables for connecting passive speakers to amps via NL4. Dear Roy, Thank you so much for all of your help with the event on Saturday and everything leading up to it! We really could not have done it without you and your team!!! Startech Productions will definitely be our first port of call for events such as this one! SpeakON connectors will have either a solder cup or a small captive screw type connection, which makes it easy to build your own speaker cables and repair them over time.You should get an instant answer on whether your application has been successful, though in some rare cases Klarna or V12 may need to look at the application in more detail.

Essentials 2-Pole NL4 Speaker Cable, 10m - Gear4music

Deciding which speaker cable connectors you’ll need starts with choosing the right amplifier and speakers for the situation.

SpeakON connectors are usually seen on live production equipment, because they are both secure and easy to connect and disconnect. ¼-inch connectors are prone to accidental disconnection, while the speaker terminal connectors you’ll find on home theater and installed amplifiers are impractical for repeated setup and tear down. Do you know your NL4 from your NLT4? Ever been caught out connecting an IPS VSUB to a Y7P? hopefully this will help… I really must say how impressed I am with the DXR12 and Soundcraft EFX combination. The sound is just so good and so easy to use, relatively speaking. Direct replacement / successor: NL4FXX-W-S (cable O.D. 6 to 12 mm) and NL4FXX-W-L (cable O.D. 10 to 16 mm) Why don’t we just change everything to standard NL4 connectors? This is something that we have considered – however, we always aim to keep our equipment as ‘industry standard’ specification where possible to maximise the integration with other systems, and when specifying systems we look at both manufacturer recommendations, as well as what our customers (and competitors) are doing to make the choice. Furthermore, not unlike the change over time from IEC to powerCON to TRUE1 connectors as a standardised power connection, the NLT4 looks to be here to stay.

IPS speakON cabling explained - Impact Production Services - IPS

Let’s say you’ve got a separate subwoofer cabinet and main speaker cabinet on each side of the stage. Thanks for another successful hire, super efficient as ever. I dropped the gear in the office.And again, as before,NL8T – Following a similar naming convention to the NL4T, IPS NL8T cabling uses Neutrik NLT8 FX-BAG (Female) connecters at one end, and Neutrik NLT8 MX-BAG (Male) connectors at the other. Like the NL4T cabling, each cable is effectively an extension lead and can be joined in series, or the male end can be mated to an NL8 cable. They are manufactured with eight core 4mm2 cable as standard and wired straight through all other IPS speakON cabling. Hi Roy – I just wanted to say a huge thank you to you and the rest of your team for everything. The show was an enormous success and will live on in Pipers history for a very long time and it was only achievable because of the efficient and meticulous professionalism that you, and your staff brought to the project. You are a star and I hope I get the opportunity to work with you again.” Let’s say you’ve got one amplifier that will be powering two stage monitors. In this example, we’ll assume that each stage monitor has an NL2 connector and the amplifier has a single NL4 connector. You can also use SpeakON breakout cables to adapt NL4 or NL8 connectors to another type of SpeakON connector. If you’re looking for something that will last and be easy to repair, Sescom NL4 breakout adapter is a good recommendation. Almost all IPS speaker cabinets are fitted with NL4 speakON connectors – apart from the d&b V8, V12, V-SUB and J-INRA SUB speakers, which have NLT4 connection plates. This means that rather than a pair of parallel wired male NL4 connectors, there is effectively now an ‘In’ and an ‘Out’. If you are using all IPS NL4T cabling and speakers within a system, then it should all just work – unless you have for example a Y7P and a V-SUB, in which case the NL4T will be the wrong gender to link out of the sub into the top. This is easily fixed by using either a standard NL4 cable for the link, or if you are using all NL4 cable, then an IPS NL4T 0.5m speakON Adaptor Male - Male 4mm will make things connect again (or you can link in and out of the NL4 on the top). Seems straight forward enough- although very frustrating when you don’t have the correct cabling to hand.