Carefully pour away, rinse out the kettle with cold water, fill with clean water and boil, then rinse again.

Refer to manufacturer’s instructions before descaling any appliance• For Kettles 1. Half fill your kettle with water and boil. Place it, unplugged, in an empty sink. Carefully add the whole contents of the sachet. Place your iron in an empty plastic bowl, warm plate down. Gently shake it until the solution begins to drain out through the steam holes. Leave for approximately 8 minutes, or until empty. Pump any leftover solution through if your iron has a spray button. Half fill kettle with water and boil. Unplug and carefully add the contents of 1 sachet. Leave for just 8 minutes for 100% limescale removal*. Rinse thoroughly with water.For Steam Irons 1. Heat iron until hot to the touch and unplug (make sure your iron is turned off during descaling). Pour the SLAM descaler into a jug and carefully pour into your iron’s water chamber. Top the chamber up with tap water and set your iron to the steam position, but do not turn the iron on. This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product

Effective -SLAM will help improve the performance and lengthen the life of your kettle, coffee machine, steam iron or shower head. Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets Heat iron until hot to the touch and unplug. Empty 1 sachet in a jug and pour into iron's water chamber. Top up with water and set to steam. Leave for 8 minutes for solution to drain through steam holes. Half fill water reservoir and add the content of 1 sachet. Leave for 8 minutes and filter solution through. Rinse thoroughly with water.