If the sound is distorted: Try lowering the volume control of your sound source, musical instrument, or microphone. Also, try unit with the Bluetooth icon is the left speaker, the unit without the Bluetooth icon is the right speaker. Ensure you are used with the power cable while it simultaneously charges the battery. The lightning bolt charge indicator illuminates For best product longevity, do not store at exceedingly hot (greater than 90°F / 32°C) or exceedingly Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this battery

If you can’t hear the microphone over the music volume: Turn down the music volume from your source. NFC (near-field communication): Touch and briefly hold your supported and enabled device to the NFC logo to pair theTo disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth button. If the Bluetooth icon Press and release the Bluetooth button to start pairing to your device. The Bluetooth icon will start flashing. If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. When the Link icon is flashing, press and hold the Link button 3 seconds to cancel the linking process.

For the electrostatic discharge (ESD) test of EN301 489-1/17, it was found that manual operation is needed to resume normal operation as intended after

If necessary, disconnect previous Bluetooth connections by holding down the Bluetooth button for 3 seconds. USB Charging Ports: Connect your device’s charge cable here to charge it. USB charging only functions when the

Charging Indicator: With the battery charging indicator, when the power cable is connected, movement of the top XL™ 220-WATT SPEAKER SYSTEM 5 Speakers (8” woofer, two 1” tweeters and two 3” drivers) deliver massive omni-directional sound battery segment shows the battery is charging. When fully charged, all battery segments will be lit without blinking. B. Press and hold a numeric preset button to assign the current station to that preset number. The display will showLightning Bolt Icon: The lightning bolt icon will illuminate when the IEC power cable is connected to wall power. Follow the pairing instructions that appear on your phone. If a passcode is required, enter “0000”. Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in your room at line of sight, so it is If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years. Here are some

connected device. To "seek" (jump to the next available station), hold either button down for a few seconds until it Master Volume Control: This adjusts the speaker’s main mix volume, which includes the Microphone Input, Auxiliary within 100’ range of the left speaker and that the right speaker is within 30 feet of the left speaker. The speakers will relink automatically the next time they are both powered on.starts to seek a station. The unit will remember the last station it was on and start at that station when powered off and SAVE” to show the station has been saved. To use an added preset, tap a preset number once lightly to go to the For the latest information about this product (system requirements, compatibility information, etc.) and product