The wallplate used follows the industry standard pattern, as used by many of the other time control manufacturers. This allows for direct replacement often without the need for re-wiring. But the Hive is much simpler and cheaper, no option for Opentherm, and no cleaver algorithms, and the base stops taking a demand for heat after 22ºC so the base unit really designed to be in a room normally kept cool, like the hall. Additional features such as service interval timer, convenient user overrides, built-in ready-to-use programmes, a day programme copy facility as well as a stylish, compact design and easy to read display make the FP715 Si the simple answer to all heating and hot water requirements. The FP715 Si can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and to provide either 2 ON/OFF"s or 3 ON/OFF"s per day, allowing the time control to be tailored to match the specific requirement of the consumer. I was very impressed with the service given my MyTub. As I was moving and it was a bit complicated with delivery I was worried that things would go wrong but they didnt. I could always get through to somebody straight away on the telephone who was knowledgeable about the situation and all went smoothly.

with Danfoss FP715si Central heating programmer - DIYnot Issue with Danfoss FP715si Central heating programmer - DIYnot

Although your likely not considering swapping all TRV heads to linked heads now, before selecting a replacement you need to consider what you may want to do in the future. It seems the Drayton Wiser TRV head is about the best, with algorithms to work out how long it takes to heat a room without over shooting, and the base has the option to work with OpenTherm with an add on module. Since I use oil OpenTherm does not interest me. So I'm not sure if the programmer is just duff, or if there is a certain combination of events which is causing the programmer to trip out. An additional range of accessories allow the FP715 Si to be used in other upgrade situations where the unit being replaced is larger than the new unit and a decoration scar would normally have been left. In terms of installation, the FP715Si offers flexibility. It can be hardwired or configured for battery operation, depending on the user's preferences and needs. This ensures compatibility with a wide range of heating systems.I got it wrong, so trying to stop you making same mistake, I selected Energenie as was told they worked with Nest, but that is not the case. There is a guide here which also says Energenie works with Nest, seems they did until Google took them over. The Danfoss FP715Si is a thermostat that offers precise temperature control for residential heating systems. Designed with functionality in mind, this thermostat allows users to easily adjust and maintain their desired indoor temperature. Thanks for the excellent service, I collected the goods from the local suppliers as you suggested to prevent delivery charges and everything went smoothly. Your customer service is especially good and not as common as you would expect nowadays so thanks again.

Danfoss Fp715 Si Prog 7day/5-2day/24hr 087n789800 - MyTub Danfoss Fp715 Si Prog 7day/5-2day/24hr 087n789800 - MyTub

There is a 230 volt and 24 volt model it seems, this is the instructions. https://www.plumbase.co.uk/link/1/h002877_20563_t.pdf It seems to have been doing it more often recently so I figured I'd try moving it out of the airing cupboard incase it was the heat affecting it. I drilled a hole in the wall and mounted it in more or less the same place on the other side (so now in the landing). One of the key features of the FP715Si is its multiple switching options. This thermostat can control both the heating and hot water systems, providing convenience and flexibility. This allows users to manage their overall energy consumption effectively.

🍪 Privacy & Transparency

If however as likely it switches 230 volt, then you can fit a system which can link to TRV's in the future allowing you to control each room independently. HOWEVER. We can offer you an alternative model that WILL FIT the FP715SIwithout an Electrician and without paying through the NOSE. This is what this listing is Selling - please get in touch if you are unsure However you say "Turned the thermostat right down but heating stayed on." which does not seem to point to the programmer. I am so pleased with the Katell Galaxy fireplace. It is just as described and looks really good in my new home. Thank you for your customer service. the Motorised Valves (HPA2) or your Circulating pump - its not always the timers fault but your electrician will be able to diagnose the fault for you before you buy.

User manual Danfoss FP715Si (English - 24 pages)

The terminals used will depend on the design of plumbing system that it is controlling. Yours is commensurate with very many in the UK. Some do have a connection to terminal 1 others, like yours don't need it. None, (with a few very rare exceptions, normally old installations) have a connection to terminal 2. I apologise that this has turned into a bit of an essay, but any expert help you could pass on to me would be greatly appreciated. Furthermore, the FP715Si is equipped with temperature compensation technology. This means that it can automatically adapt to changes in room temperature, ensuring consistent and comfortable heating throughout the day. Only issue is the soft close is very, very slow to close. I have one other of these fitted to the main bathroom and that works OK. Cannot see how this can be adjusted.The FP715 Si two-channel full programmer has separate Heating and Hot Water outputs operating on completely independent time bases for maximum flexibility. The FP715Si features a user-friendly interface and a clear digital display, making it simple to program and operate. With its intuitive navigation, users can easily set up specific heating schedules and temperature levels for different times of the day.