JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film to Digital Photos,Film and Slide Scanner Accessories

Product Information

I've tested this with some extremely contrasty slides. The process can pull out amazing tonality in both highlight and shadow areas that I just can't get with the scanner. But I would only be doing that kind of thing with 'special' images, of course. That is almost true for me, although I can sometimes get what are slightly better results using a 24mp camera than I get with my film scanner.

I found my workflow with the ES-2 difficult, and with the camera I was using the results were no better than using a scanner. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.

The tolerance of the sliding carriers in the film housing is not ideal. There's room for some slight tilting. I fixed this by adding bits of thin, dense foam to the slot in the film holder where the carriers sit. That eliminates any play and keeps the carriers level. I also know how to fix the problem preventing the film housing from getting close enough to my 50mm lens to completely fill the frame, but that one requires considerably more work.) I was going to cut that tube to a better length, but the easy solution is to instead substitute one of the #2 tubes (there are two of those in the kit), which are shorter. The other #2 tube remains available as an extension for use with my APS-C camera if I need to shoot with that for some reason. I believe the combination of two #2 tubes would only be needed with macro lenses longer than about 80mm, so that's not an issue for me.

It can be used to photograph 35mm film and is compatible with the following select CAN., NIK., SON., Laowa and OLY. lenses 1: It is recommended to select the image stabilizer switch of the lens to "OFF" when using the FDA-K1. It comes with more lens adapter rings than the ES-2, and also more options for extension. That makes it possible to use it with my full frame camera and either my 50mm macro or 100mm macro, or with my APS-C camera and 50mm macro.I have the option of doing that, but I prefer correcting the problem. One reason why I like products of this type is that they don't require any special support setup. I can have the camera sitting normally on a desk, using window light or a small artificial light source. It's good ergonomics with very little setup or teardown needed. One slight annoyance with my personal gear is that I can't make the extension short enough to entirely fill the frame using my full frame camera with the 50mm macro. At the shortest extension, the lens can provide only about 0.9x magnification instead of 1x, meaning the final pixel resolution of the image is slightly less than optimal. That's a result of the design of the lens housing, so it will likely be different with different lenses. Not a big deal, really. JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film... Description The supplied adapters allow you to attach the set to different lenses and the angle of view and tilt can be adjusted by using the view angle adjustment ring on the barrel. Dedicated film holders for both film strips and mounted slides2 are included, as well, to help hold the film taut and to benefit handling. Besides that, the set is particularly well-suited for the NIK. D850 camera due to its dedicated Negative Digitizer mode and ability to automatically reverse colors in-camera to expedite the digitizing process. Additionally, you can use the set together with the included LED Light3 to get high quality light source and improve image sharpness.

JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film to Digital Photos,Film and Slide Scanner Accessories I found my workflow with the ES-2 difficult, and with the camera I was using the results were no better than using a scanner. As I didn’t want to replace my digital camera I just got rid of the ES-2, but if I’d have kept it I’d have had to do something. I think foam would probably solve the issue on the ES-2 too. Complete Accessories】The Slide scanner set supplied 1x barrel, 8x adapters 1x 35mm film holder(Negative holder), 1x 35mm Slide holder(Positive holder), 1x LED Light with 42 beads and Photos- Works Standalone, No Computer/other camera accessories,film scanner required. levels 6500K LED light】Super bright LED light with soft screen provides 10 levels adjustable Large Viewing Area Ultra Bright Daylight LED Illumination to Render Images in Vivid, Crystal Clear Detail.The length of the control line is 1.5m, you can control the light switch at will. Complete accessories】Works with 1x 35mm film holder(Negative holder), 1x 35mm Slide holder(Positive holder), 1 LED Light with 42 beads and Photos- Works Standalone, No Computer/other camera accessories required.When using an incandescent light source, keep the diffuser screen at least 30cm (1 ft.) from the bulb. If the adapter is placed too close to an incandescent bulb or left too long in its vicinity, the heat may damage the film or deform the holder.