Overall, we’d say that connectivity is decent – but not perfect. Skullcandy Indy Evo review: Performance You will hear a tone to indicate the sync was successful and ONLY the LEFT bud will begin to flash RED/BLUE. You will be able to listen up to 30+ feet (10+ meters) away from your paired device, though your connection experience may vary based on your environment. When charging the device, we recommend using a cable, charger, or outlet with a power output that does not exceed 18-Watt (5 Volts/3.6amps). Just out of the box, the sound is decent enough. However, there’s nothing particularly special to speak of here. As we noted previously, you don’t get active noise cancellation, although the passive effects are decent.

Note: This product has Rapid Charge. This means that you can charge your earbuds in the case for 10 minutes to get 1.2 hours play time. Minutes of charge for the ear buds will provide 2+ hours of playtime, and 10 minutes of charge in the charging case will provide 4+ hours of playtime. First thing is to remove the earbuds from your device. Open your Bluetooth settings > remove “Indy Evo” from the paired devices list. After you’ve found your Tile, tap the blue “Done” button or press once firmly on the Tile button to make your Tile stop ringing.For the optimal Solo Mode functionality, first Power On and pair your buds to your device normally or as described in our trouble shooting section. This will ensure the seamless transition between Stereo and Solo modes. However, the features that the Indy Evo earphones do have are decent enough. For instance, you get a total of 30 hours of battery life with a rapid charge function when you’re in a hurry.

Alternatively, you can manually enable pairing mode by touching and holding the touch area on both earbuds for four seconds . Do this while the earbuds are turned on. How to Reset the Indy Evo Buds? You can also enable pairing mode by touching and holding the touch area while the buds are turned on .Movie Mode' is great for most media. From crisper dialogue to more booming action scenes, you'll hear improved audio nuances both big and small. Today, you can buy everything from standard wired in-ear headphones, to active noise cancelling headphones with an over-ear design.

Yes! INDY™ EVO is sweat, water, and dust resistant (IP55), and the additional stability gel feature improves fit, comfort, and is great during exercise. The Skullcandy brand is one that shows up frequently in discussions of some of the best budget audio providers. Over the decades, the alternative-style business has earned its space at the top of the marketplace. Touch and hold each bud for 10 seconds to completely reset them (this will power cycle them on and off again). Open the Settings menu [Settings] on the Android, head to Bluetooth Settings [Bluetooth] and select your headphones [ Indy Evo] from the list. This feature also allows the user to utilize either the LEFT or RIGHT bud in Solo Mode, rather than being limited to just one specific side.Connectivity is an area where Skullcandy neither excel, nor disappoint. As mentioned above, there are no fancy codecs here to improve your listening experience. The headset will automatically enter pairing mode if it’s the first time they are used (if the headset has no pairing information stored). Put the headset units into both ears and proceed to step 4. As mentioned above, the IP55 rating means that your earphones are dust, and sweat resistant. However, we wouldn’t recommend immersing these earphones in water. If you haven’t heard of this before, it’s a service that uses Bluetooth to locate misplaced or lost objects. If you’ve misplaced your earphones and you’re still in Bluetooth range, Tile will help you find them.

That means they’re less likely to fall out when you’re running. The case and buds combined deliver around 30 hours of audio. Other features are available too, such as Ambient mode, when you need to tune into the world around you. There’s also a selection of 3 EQ modes to choose from. Take out the earbuds from the case and wait a few seconds as they pair with each other. They will be blinking blue while they do this. Once successfully paired, a voice prompt will notify you are now “Connected” and you will see INDY™ EVO twice in your “paired devices” list. This allows both the LEFT and RIGHT bud to work alone, which allows more media controls and features to be activated from either side, and the microphone to work on either side. Functions such as, play/pause, answer call/hang up call, Activate Assistant, switching between EQ modes, and Ambient Mode can be controlled on both the LEFT and RIGHT bud, simplifying the user experience.Answer: Various reasons could prevent the earbuds from pairing together, but there are a few solutions that will solve this problem . Find the Skullcandy earbuds in your Bluetooth menu and pair them to your device. The earbuds will say “ Connected” when the pairing is complete. If you are having problems or need to pair a second or subsequent device, put the earbuds into both ears, then hold your fingers to the sensors on both the left and right units at the same time for 6 seconds to enter pairing mode. Resetting your earbuds to resolve pairing issues